Audi A4

since 1994 release

Repair and operation of the car

The distributive (central) differential serves for alignment of forward and back transmission. (Differentials of a lobby and back axis work irrespective of it.)

He accommodates – outside not perceived as separate knot – behind on a mechanical transmission. Engineers speak: it is integrated.

The name torsen proceeds from firm on production of transmissions of Gleason in which this differential was invented. Its name is derivative of the English letters Torque Sensing that means "feeling a torque". Thus, it already consists in this concept the description of function, as:

• the differential transfers the increased force to the drive of that axis, at which best coupling with soil;
• it occurs so effectively (it is caused by a design) that this axis can transfer by 3,5 times bigger effort, than other axis.
• but at equally good properties of soil equivalent distribution of the drive to a lobby and a back axis is carried out, i.e. there is no the preference of one axis caused by a design.

Principle of functioning

Work of torsen-differential is based on the principle of the worm drive and uses its fundamental principles:

• the worm drive can be designed in such a way that will possess high or low ability of blocking (blocking size in this case repeatedly increased force with which transfer has to be turned);
• the size of value of blocking depends on a tilt angle of a worm, i.e. at a worm there are a lot of flat or few abrupt rounds;
• example of a flat worm with high extent of blocking is the jack in which the knee which the worm affects, lifts the car, but the car can never set in motion a knee at the expense of the weight.

Arrangement

At the expense of an intelligent arrangement in the sum of eight worm wheels and 12 gear wheels in combination with the differential case, a hollow shaft, a power shaft ahead and a power shaft the best performance of function about which it was told in the penultimate paragraph is behind reached.