Audi A4

since 1994 release

Repair and operation of the car

A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
- Salon
   Control panel
   Average console
Search of malfunctions
Technical characteristics

Control panel

Dismantle of a reception pocket at the left

For dismantle of the left facing of the control panel combined with a reception pocket weaken bolts with 1 on 4. At installation insert a reception pocket in directing ahead below.

By shooters it is shown where there are bolts which need to be unscrewed at dismantle of a box for gloves.

The left lower facing of a control panel which is combined with a reception pocket, almost always has to be dismantled when it is necessary to provide access to a reverse side of a control panel. According to simple also dismantle is:


  1. Remove facing of a box with safety locks from outer side on a control panel at the left.
  2. Unscrew four bolts with six-sided heads – two on a box with safety locks both on one on the right and to the left of a steering wheel.
  3. Slightly cast away a reception pocket down and remove it back.
  4. At installation track that the first line of facing was pushed in both directing ahead on the bottom of the car and on pedals.
  5. Besides, push the right upper edge in a bracket on a control panel.
  6. Do not tighten bolts too strongly.

Dismantle of a box for gloves


  1. Remove facing from outer side on a control panel on the right. Under it unscrew two bolts with six-sided heads.
  2. Open a box for gloves.
  3. Unscrew two screws in a box for gloves and the second above in the box.