A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
- Salon
Control panel
Average console
Seats
Search of malfunctions
Technical characteristics
|
Average console
Dismantle of back part of the console
|
|
Dismantle of back part of the console, 1st stage: take out a fixing hairpin (shooter) below on the handle (1) emergency brake, remove from the lever of the parking brake the handle and facing (2) forward. |
|
|
Dismantle of back part of the console, 2nd stage: after dismantle of an ashtray the nut is behind weakened (1). |
|
|
Dismantle of back part of the console, 3rd stage: wring out a protective cap (2) behind on forward part of the console (shooter), under it unscrew the screw (1). |
|
|
- Extend the lever of the parking brake.
- Screw-driver wring out below on the handle of the parking brake a small fixing hairpin and take out.
- Take out the handle of the parking brake forward.
- Remove facing of the lever of the parking brake forward and up.
- Open an ashtray and take out.
- Weaken a nut under it.
- On the right and at the left wring out protective caps near a seam of back/forward part of the console, unscrew under them screws.
- Lower back part of the console on its forward part (wring out down).
- Pull the emergency brake and the console remove forward over the lever of the emergency brake up.
- Having highly lifted the console, take out from clips diagnostics wire socket near an ashtray.
|
|
Dismantle of forward part of the console
|
|
Dismantle of forward part of the console, 1st stage: in assembly mine of the radio receiver the screws designated here by figures from "1" to "4" have to be weakened. |
|
|
Dismantle of forward part of the console, 2nd stage: in cars without climatic installation remove regulators of heating/ventilation and unscrew screws (shooters). |
|
|
Dismantle of forward part of the console, 3rd stage: screws from 1 to 4 have to be unscrewed after removal of the decorative panel of the average console. |
|
|
Dismantle of forward part of the console, 4th stage: wring out a protective cap of the average console (2) ahead in the driver's feet, unscrew under it a nut (1). |
|
|
- Disconnect a wire of mass of the accumulator.
- Dismantle back part of the console assembled.
- Take out back edge of a frame of a cuff of the lever selector from grooves and shift a cuff up.
- At an automatic transmission: unscrew the lever selector button, remove facing.
- Dismantle the radio receiver (the head Instrumenty and devices).
- Weaken two screws in assembly mine of the radio receiver.
- Remove all three regulators of heating/ventilation.
- Unscrew two screws under regulator buttons.
- In cars with completely automated climatic installation it is excessive work.
- Remove the decorative panel of the average console (switches are not dismantled).
- Under the decorative panel unscrew four other screws.
- Wring out small facings in the driver's feet, under them unscrew a nut and remove the console over a cut hairpin.
- Remove the console back.
- At installation track that directing on the right ahead on the average console entered a collar on a frame.
|
|
Dismantle of facing of a steering column
Information on dismantle of facing of a steering column you will find Switches in the section.
Dismantle of facing in the driver's feet
Under facing of a rack of a door in feet of the driver there are arms of shtekerny sockets (see also head the Electrotechnical equipment).
Dismantle
|
|
- Open a door, remove a rubber level.
- Weaken two screws.
- Remove facing.
|
|
|
|