Check of level of brake fluid
Constant control
|
- In Audi A4 too low level of brake fluid is shown by also control bulb on a control panel, but nevertheless you should not refuse visual control:
- Open a cowl and wipe a tank with brake fluid a rag.
- Level of brake fluid has to be in a transparent broad tank between marks "min." and "max.". In this case everything is all right.
|
|
Too low level of brake fluid?
If overlays of disk brakes are already a little erased, the tendency to lowering of the level of liquid up to the lower mark is looked through; if they new, liquid level again exceeds the top mark. This absolutely normal phenomenon as at the erased slips the moved forward are a little farther pistons of a disk brake leave the bigger volume which is filled with brake fluid in cylinders of brake supports. The situation becomes critical when in a tank the level of brake fluid falls below a mark of "mines". As it does not evaporate and is not spent, that is a leakage place. Quickly find out the reason, the brake pedal did not refuse yet! Having added will be eyewash!
|