Audi A4

since 1994 release

Repair and operation of the car



A4 Audi
+ Running gear
- Regular servicing
   Installation in a starting position of the indicator of frequency of maintenance
   Crossing of dates of maintenance
   The plan of maintenance for the motorist
   Diagnostics in Audi workshop
   Diagnostics of an executive element
   Poll of a database of malfunctions
   Diagnostics as the help to the fan
   Identification of the car
   Safety measures on a workplace
   Jacks
   Greasing of all details
   Check of level of oil
   Oil consumption
   Oil choice with the correct specification
   Viscosity of oil
   Correctly picked up engine oil for Audi
   Replacement of engine oil and oil filter
   Check of level of liquid in system of a servoupravleniye
   Check of level of oil in a mechanical transmission
   Check of level of oil in the drive of the back bridge
   Control of the ATF level in an automatic transmission
   Check of level of oil in the main transfer of an automatic transmission
   Replacement of ATF
   Greasing of drafts, hinges and locks
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ body Details
+ Salon
Search of malfunctions
Technical characteristics





Jacks

At the left: the onboard jack (2) can be established only under the tags (1) which are squeezed out in metal in a car bottom fold. It belongs both to a lobby, and to back part.

On the right: such false tripod too is put only under a tag (1). In any case it has to stand behind an external fold of a body or on a longeron under a body. Not to damage a body, it is recommended to enclose between them a plate (2).

Jacks exist any cost and for the different purposes. Here different types are described:

Regular (onboard) jack: always enclose a small plate in order that the basis of a jack could not be pressed into soil.
Jack of parallelogrammny type: in this case only the steady model is recommended. Such jack costs on the car which body in points of rise is already weakened. Such jack can be established a little further to the center of a body.

Hydraulic plunger elevator: before purchase check height of its rise. Too short model will not lift a wheel on the necessary height from the earth. And simply you will not thrust too high elevator under the car.

Garage (mobile) jack: the short, small model which is not taking a lot of place best of all will be suitable for the motorist.