Audi A4

since 1994 release

Repair and operation of the car



A4 Audi
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
- Body details
   Front bumper
   Damages to result of accidents
   Frontal part of the car
   Cowl
   Wings
   Lateral levels
   Doors
   Dismantling of doors
   Mirror of the external review
   Trunk lid
   Rear bumper
   Sliding/removable roof
   Check of a corrosion-resistant coating of the bottom
   Clearing of openings for a water drain
+ Salon
Search of malfunctions
Technical characteristics




Lateral levels

Dismantle of shock-proof levels

Unfortunately, the varnished lateral levels cannot be removed from doors, without having destroyed them. The one who is ambitious, can try to remove a level, previously having heated its hair dryer to 40 °C. Then wring out a level from facing by the screw-driver which is wrapped up by a rag (for protection of varnishing). From a reverse side of doors wring out black caps.

 PERFORMANCE ORDER

  1. At installation the surface of metal of a door or a wing has to be pure, removed dust and fat-free. Besides, metal and a level has to have a room temperature.
  2. Remove a protective film from a level just before installation.
  3. Insert a level pins into openings, level and press in the field of gluing – especially on the ends.
  4. In addition press a level, strongly pressing on it (100 N/cm 2), or roll it the roller for wall-paper.
  5. For the period of hardening (4 hours) the car has to be at the room temperature.